Mo Clamp
Mo-Grip Jaw Surface

Now available on Flash Clamp Family #0450, 0451,0452. Coming soon to other tools.

This is quite possibly the biggest turn of events for gripping various hard to hold surfaces on today’s vehicles.

The new super steels that contain such alloys as Boron and other slick, hard surfaces make conventional gripping a real challenge for the tools and wear factor on jaws is quite significant.

Being dedicated to helping the technician complete his job, we took the challenge presented by the new products as an opportunity to upgrade our efforts and products to meet Boron Steel head on.

7400 Mo-Pro Gauge Package

his package includes #7001 Universal Tram Gauge, #7200 Deluxe Centerline Gauge, #7300 Strut Tower Alignment Gauge, display board and hooks.

Be sure to use your unibody and chassis dimension and specification charts.

Weight: 96 lbs (43.54kg)
Replacement Parts: #710120 Board Only, #710126 Hook Set Only.
Made in the U.S.A.
7000 Universal Tram Gauge w/storage case

Tram Instruments are a versatile and indispensable tool for determining collision damage to unibody cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components.

The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other.

Measures from 21/2″ (65mm) to 11′ (3.3m). Level bubble installed in sliding head for accuracy in measurement. Includes hard plastic storage case.

Weight: 13 lbs (5.90kg)
Made in the U.S.A.
0300 JR™ Clamp

One of Mo-Clamp’s original self-tightening clamps. A must for every body man. 1½” wide bite for aggressive pulling. Original wedge. New angled tooth design.

 

Gripping Surface: 1½” wide (38 mm)
¾” deep (19 mm)
Capacity: 5 tons (4,536 kg)
Overall Length: 9″ (229 mm)
Weight: 5 lbs (2.27 kg)
Replacement Parts: #5350 Nut & Bolt, #9701 Wedge, #840087 Spring
Heat Treated Steel.
Made in the U.S.A.
0305 Dyna-Mo™ JR Clamp

New generation of Mo-Clamps. Self-tightening. Thin-edged nose for getting into hard-to-reach places. Drop-forged round wedge to keep twist out of chain, aggressive cross-hatch tooth design, spring loaded for easy opening.

Gripping Surface: 1¼” wide (32 mm)
1″ deep (25 mm)
Capacity: 3 tons (2,722 kg)
Overall Length: 7″ (178 mm)
Weight: 2 lbs (.91 kg)
Replacement Parts: #5247 Nut, Bolt, Spring & Washer, #9702 Wedge
Heat Treated Steel.
Made in the U.S.A.
0307 Dyna-Mo™ Corner Clamp

With 3 tons of capacity, the Corner Clamp conforms to the exacting standards of all Mo-Clamp products. Made from Mo-Clamp Tru-Tuff™ heat-treated steel alloy, the 90-degree Corner Clamp uses a drop forged wedge for added strength. Eliminates the need to use two separate clamps and will be able to get into narrow and confined areas.

Capacity: 3 tons (2,722 kg)
Overall Length: 7″ (178 mm)
Weight: 2.14 lbs (.97 kg)
Throat Depth: 1″ (25.5 mm)
Replacement Parts: #5257 Nut, Bolt, Spring & Washer, #9702 Wedge
Heat Treated Steel.
Made in the U.S.A.
0400 W® Clamp

Self-Tightening. The Super Clamp for the tough jobs. Ultra-wide gripping surface. Grabs 4¼” of metal. Original wedge. Original straight cut tooth design.

Gripping Surface: 4¼” wide (108 mm)
1″ deep (25 mm)
Capacity: 6 tons (5,443 kg)
Overall Length: 9½” (241 mm)
Weight: 11 lbs (4.99 kg)
Replacement Parts: #5120 Nut & Bolt, #9801 Wedge
Heat Treated Steel.
Made in the U.S.A.
0405 Dyna-Mo™ W Clamp

New generation of Mo-Clamps. Self-Tightening. Wider tooth surface to grab more thin metal without tearing. Drop-forged round wedge to keep twist out of chain and aggressive cross-hatch tooth design.

Gripping Surface: 2¼” wide (57 mm)
1¾” deep (45 mm)
Capacity: 3 tons (2,722 kg)
Overall Length: 7″ (178 mm)
Weight: 3 lbs (1.36 kg)
Replacement Parts: #5247 Nut, Bolt, Spring & Washer, #9702 Wedge
Heat Treated Steel.
Made in the U.S.A.
0440 Twin Claw™ Clamp

Self-Tightening. The Twin Claw™ jaws and drop-forged wedge distribute the clamping load – reducing the possibility of metal tearing. Sever duty tooth design for maximum gripping bite and minimized metal distortion. The jaw openings allow use around lips of core supports and aprons, clamps to floor pans and myriad of other pulls.

Gripping Surface: 4″ wide (102 mm)
Capacity: 5 tons (4,536 kg)
Overall Length: 8″ (203 mm)
Height: 3″ (76 mm)
Weight: 8 lbs (3.63 kg)
Replacement Parts: #9701 Wedge, #5255 Nut, Bolt & Washer, #840081 Spring
Heat Treated Steel.
Made in the U.S.A.
0450 Flash Clamp™ 5-ton

New Mo-Grip™ surfaced jaws provide superior traction when coupled with pivoting head for uneven surfaces. Spring-loaded operation means no impacting to tighten. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.

Capacity: 5 tons (4,536 kg)
Overall Length: 8″ (203 mm)
Width: 2″ (50.7 mm)
Weight: 3 lbs (1.36 kg)
Replacement Parts: #010453 Pivot Jaw, #010702 Small Round Wedge, #520039 Pivot Pins, #520033 Retaining Bolt, #840076 Spring
Heat Treated Steel.
Made in the U.S.A.
0451 Flash Clamp™ 3-ton

Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on almost any surface. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.

Capacity: 3 tons (2,722 kg)
Overall Length: 8″ (203 mm)
Width: 1½” (38 mm)
Weight: 2.8 lbs (1.27 kg)
Replacement Parts: #045103 Pivot Jaw, #010704 Wedge, #520038 Pivot Pins, #520031 Retaining Bolt, #840076 Spring
Heat Treated Steel.
Made in the U.S.A.
0452 Flash Clamp™7-ton

Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on most surfaces. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.

Capacity: 7 tons (6,350 kg)
Overall Length: 8″ (203 mm)
Width: 3½” (89 mm)
Weight: 4.5 lbs (2 kg)
Replacement Parts: #045203 Pivot Jaw, #010706 Wedge, #520029 Pivot Pins, #520033 Retaining Bolt, #840076 Spring
Heat Treated Steel.
Made in the U.S.A.
0480 135-Degree Swivel Clamp

New generation of Mo-Clamps. Self-tightening. Provides multi-angle pulling from a single clamp. This clamp allows the drop-forged round wedge to move within the clamp’s channel to provide the exact angle of pull needed – while allowing it to pivot to avoid twists in the chain.

Gripping Surface: 2″ wide (51 mm)
Capacity: 5 tons (4,536 kg)
Overall Length: 5″ (127 mm)
Weight: 5.7 lbs (2.6 kg)
Replacement Parts: #010703 Large Round Wedge, #5256 Nut, Bolt & Washer
Heat Treated Steel.
Made in the U.S.A.
0550 T.O. (Tight Opening) Clamp

Mo-Clamp’s new design Tight Opening Clamp has all the same gripping dimension requirements as the old design. Redesigned and strengthened with our totally new screw drive mechanism. Still a full 3 ton capacity. Still able to reach core support and upper sheet metal areas where no other can. Perfect for small pick-up frame rails.

0551 T.O. (Tight Opening) Clamp

Mo-Clamp’s re-introduced the Tight Opening Clamp because popular demands had to be met so the old design is back. Still a full 3 ton capacity. Still able to reach core support and upper sheet metal areas where no other can. Perfect for small pick-up frame rails.

Gripping Surface: 1½” wide (38 mm)
½” deep (13 mm)
Capacity: 3 tons (2,722 kg)
Overall Length: 6½” (165 mm)
Weight: 3 lbs (1.36 kg)
Heat Treated Steel.
Made in the U.S.A.
0600 Unibody® Clamp

Designed as a tie-down for unitized bodies with no pinch welds, and/or pulling floor pans. Staggered case-hardened pin teeth allow full non-slip gripping in any plate location as plates need not be squarely lined up with one another.

4″ wide (102 mm)
6″ deep (152 mm)
Capacity: 5 tons (4,536 kg)
Overall Length: 9¼” (235 mm)
Weight: 11 lbs (4.99 kg)
Replacement Parts: #5121 Nut & Bolt, #9920 Nails & Plugs (20 each)
Heat Treated Steel.
Made in the U.S.A.
0650 Box® Clamp

A must for pulling on box rails with welded-on bumper flanges. Reaches around protruding metal to get a grip on hard-to-reach surfaces. Its heat-treated jaws grip a substaintial area for pulls from several directions and angles. Gator tooth design.

Gripping Surface: 2″ wide (50 mm)
2″ deep (50 mm)
Capacity: 4 tons (3,629 kg)
Overall Length: 10″ (254 mm)
Weight: 10 lbs (4.54 kg)
Replacement Parts: #5330 Nut, Bolt & Washer
Heat Treated Steel.
Made in the U.S.A.
0655 Dyna-Mo Box™ Clamp

These heat-treated jaws reach around flanges and other obstructions to get a grip on hard-to-reach surfaces. Severe duty tooth design for aggressive pulling power.

Gripping Surface: 1¼” wide (32 mm)
½” deep (10 mm)
Capacity: 3 tons (2,722 kg)
Overall Length: 8″ (201 mm)
Weight: 4 lbs (1.81 kg)
Replacement Parts: #9702 Wedge, #5254 Nut, Bolt, Spring & Washer
Heat Treated Steel.
Made in the U.S.A.
0660 Long Nose ™ Clamp

Similar to the popular #0300 Jr® Clamp, the Long Nose is self-tightening and includes the original wedge. Cross-hatch tooth design, spring loaded for easy opening, deeper reach for hard-to- get-to areas.

Gripping Surface: 1¾” wide (45 mm)
1″ deep (25 mm)
Capacity: 5 tons (4,536 kg)
Overall Length: 9½” (241 mm)
Weight: 6 lbs (2.72 kg)
Replacement Parts: #9701 Wedge, #5251 Nut, Bolt, Spring & Washer
Heat Treated Steel.
Made in the U.S.A.
0670 Baby Box™ Clamp

Self-tightening. Great for single-lip flanges and inside frame horns. Original wedge; cross- hatch tooth design; spring-loaded for easy opening. Throat clearance of 1½” high (38 mm), 1¼” deep (32 mm).

Gripping Surface: 1¾” wide (45 mm)
1″ deep (25 mm)
Capacity: 5 tons (4,536 kg)
Overall Length: 9½” (241 mm)
Weight: 7 lbs (3.18 kg)
Replacement Parts: #9701 Wedge, #5252 Nut, Bolt, Spring & Washer
Heat Treated Steel.
Made in the U.S.A.
1340 Bolt Puller™

Made for those difficult to get at suspension and frame bolts that need the area they screw into realigned or straightened.

Use this for up to a 2.5 ton pull and be certain you are dead center over the bolt area. Uses the oem bolt to pull against the threads with.

Just loosen the bolt enough to get the tool cradle under the head and retighten a few turns to assure no thread loss and pull away.

1450 Numerous Angle Puller™

The NAP allows pulls from any angle. Just put the bolt through a 1/2 ” hole and pull. Use with #2100 or #2400 Multi-Adapter Plates, or with back-up plates. Designed for use with 3/8″ chain.

Capacity: 4 tons (3,629 kg)
Overall Length: 6″ (152 mm)
Weight: 2 lbs (.91 kg)
Replacement Parts: #5245 Nut, Bolt, & Washer
Heat Treated Steel.
Made in the U.S.A.
1500 Pull Ring™

The Pull Ring for the #2100 2MA Adapter Plate for unlimited body and frame pulls, such as frame horns, brackets, cowls, etc. Has recessed pockets to hold bolts stationary for easy, one-handed tightening.

Capacity: 5 tons (4,536 kg)
Overall Length: 4½” (114 mm)
Weight: 2 lbs (.91 kg)
Replacement Parts: #5350 Nut & Bolt
Heat Treated Steel.
Made in the U.S.A.
1600 Multi-Purpose Anchor Hook™

A valuable, small hook device for use on both conventional frames and unitized bodies. The different ends are used for a variety of pulls and anchoring. The bottom foot can be used with both Mo-Clamp #2100 and #2400 Multi-Use Adapter Plates for strut alignment corrections.

Capacity: 4 tons (3,629 kg)
Overall Length: 7½” (191 mm)
Weight: 2 lbs (.91 kg)
Heat Treated Steel.
Made in the U.S.A.
1650 Double Eye Chain Hook™

A handy chain hook-up pulling plate for making double pulls. The special design allows for both wide or narrow pulls. Double pulls, using multiple self-tightening clamps, can be made from the same pulling tower or pulling post. Features Mo-Clamp easy chain hook-up system. Designed for use with 3/8″ chain.

Capacity: 5 tons (4,536 kg)
Overall Length: 6½” (165 mm)
Weight: 3 lbs (1.36 kg)
Heat Treated Steel.
Made in the U.S.A.
1700 Chain Locking Fork™

Handy stopper for chain. Used to maintain chain tension while adjusting for pulls. Locks chain tight. Heat-treated alloy steel. Designed for use with 3/8″ chain.

Capacity: 6 tons (5,443 kg)
Overall Length: 6″ (152 mm)
Weight: 2 lbs (.91 kg)
Heat Treated Steel.
Made in the U.S.A.
1800 Track Hook™

Quick tie-down for track systems or back anchoring on frame racks. Lip can be used for pulling damaged areas; varied multiple uses for chain lengthening or shortening. Slot can be used for chain hook-up. Designed for use with 3/8″ chain.

Gripping Surface: 3″ wide (76 mm)
Capacity: 6 tons (5,443 kg)
Overall Length: 6″ (152 mm)
Weight: 2 lbs (.91 kg)
Heat Treated Steel.
Made in the U.S.A.
1850 Inline Slider™

New generation of Mo-Clamps. Self-tightening. Made of heat- treated Tru-Tuff© steel alloy. Grabs on to flanges and provides a sure grip while pulling “in-line”. Finger grips are cast into the tool to provide easy handling while positioning the clamp.

Gripping Surface: 3″ (76 mm)
Capacity: 5 tons (4,536 kg)
Overall Length: 7″ (178 mm)
Weight: 3.4 lbs (1.54 kg)
Replacement Parts: #185005 Jaw “A”, #185006 Jaw “B”
Heat Treated Steel.
Made in the U.S.A.
1900 Quick Hook™

Four hole-size selection for quick hook-ups in existing frame holes for pulling of damaged frames. Uses Mo-Clamp’s easy chain hook-up system. Hole sizes: 1 7/8″ (48 mm), 1 5/8″ (41 mm), 1″ (25 mm), 7/8″ (22 mm).

Capacity: 4 tons (3,629 kg)
Overall Length: 6½” (165 mm)
Weight: 3 lbs (1.36 kg)
Heat Treated Steel.
Made in the U.S.A.
6314 M-Hook™ w/Chain

Ever get really frustrated with the conventional Ford-T style hooks and then grab the GM-R style hooks and they don’t work either?

Well, here’s the newest in that family of holding devices. The M-Hook™ with chain will most likely do the job when the others quit.

This was developed by a bodyman who made them up for his friends and they all swore by it. We tested them and received very positive results.

OK, so you might find a hole it doesn’t fit once in a while, but not very often, of that we are certain.

6319 Jumbo Nylon Sling™

Biggest one we make. Designed for lower/ upper suspensions, door pillars and about anywhere you need a pull that conforms to odd shaped vehicle parts.

Overall Length: 60″ (762mm)
Width: 2 ” (25mm)
Made in the U.S.A.
6330 Jumbo Sling™ protective cover

That Fantastic giant sling does so many things well it is a shame you need to protect it, but it is only nylon and will abrade unless cared for.

This simple cover will add years of use to it. Sharp metal edges become VERY sharp when tonnage is being applied.

This will be an opportunity to afford yourself some insurance that the sling will be there for a few more years to come.

Made in the U.S.A.

7055 Cone™ upgrade for trams

These retro-fit all Mo-Clamp trams. Guarantee you are centered in a hole or centered over a rivet or bolt head.

Made of tough Delrin Plastic. Designed to fit all Mo-Clamp trams including baby tram and #7000. Allows centering of holes for easier 1-man tramming on underside of vehicles and engine compartments. Will make sure you are centered on those holes for precise measurements.

Size: 2″ Cubed
Weight: 2 oz.
Made in the U.S.A.
7056 Socket Set of (4)™ upgrade for trams

Made of spun aluminum. Designed to fit all Mo-Clamp trams including baby tram and #7000. Allows centering on bolts and frame rivets for easier 1-man tramming on underside of vehicles and engine compartments. Will make sure you are centered on those points for precise measurements.

Size: Small handful
Weight: 4 oz.
Made in the U.S.A.
  www.straight-square.com
  Proudly based in Minnesota
  © Straight and Square Dist. LLC


Straight and Square Distributing LLC is a full line supplier to the collision repair industry serving Minnesota (MN) , North Dakota (ND), and Northwestern Wisconsin (WI).