CJJ Frame Machines
The Signature CJJ Frame Rack

The Signature is an automotive frame rack machine that comes in three-, four- or five-tower configurations.

CJJ, Inc., is a longtime manufacturer of frame equipment that makes and sells the Signature frame rack. Made in the U.S.A.

The Signature’s 10,000-pound lift capacity is supported by both the ram’s steel construction and the lifting power of dual hydraulic rams.A hand-held unit on 25 feet of cord controls the Signature’s centralized hydraulic system.

Specification
  • Length of bed top: 20 ft.
  • Length w/towers extended: (5 tower machine) 24 ft. 3 in.
  • Width of bed: 88 in.
  • Width w/towers extended: 14 ft. 4 in.
  • Width of treadway: 28 in.
  • 12,000 lb. lift capacity.
  • Weight: 5 tower 8,100 lbs., 4 tower 7,650 lbs., 3 tower 7,050 lbs.
  • Width between treadways: 32 in.
  • Overall height: 9 ft. 3 in.
  • Working height: 31 in.
  • Hydraulics: (5 tower machine) 10 & 5 ton
  • Power required: 120v, 20 amp, dedicated service


Signature Hybrid Frame Rack

Our Signature Hybrid Frame Rack Machines were created with versatility and power at top of mind. They have 3 pivoting pulling towers at one end of the bed and 2 (or 3) movable towers that ride on a track around the other end.

The pivoting towers provide strength, stability and repair width while the movable towers make 360-degree pulling access possible. This combination gives auto body technicians 10-ton hydraulics at each tower plus 360-degree pulling access to the vehicle frame.

That makes the Hybrid a great frame rack with less “dead zones”. The towers glide into position with smooth, one-handed motion around the track making tower group pulls easier than ever.

Features
  • 10-ton hydraulics in all towers provides the pulling power.
  • Movable towers make group pulls possible.
  • 360-degree access, less dead zones.
  • Comes with 2 or 3 movable towers, your choice.
  • V-rollers allow smooth, one-handed positioning of towers along track.
  • Easy tie-down system secures track towers for pulling.
  • Removable cross members allow access to front and rear of vehicle.
  • Ability to group towers at drive-on end.
  • Hydraulic quick connections on frame rack bed, 2 per side.
  • Two-year limited warranty.
  • Signature Hybrid frame machines are made in the USA.
Specifications:
  • Length of bed top: 20 ft.
  • Length w/towers extended: 24 ft. 6 in.
  • Width of bed: 88 in.
  • Width w/towers extended: Pivot end 13 ft. 4 in. Track end 11 ft. 4 in.
  • Width of treadway: 28 in.
  • Width between treadways: 32 in.
  • Working height: 31 in.
  • Hydraulics: 10 ton
  • Power required: 120v, 20 amp, dedicated service


Signature Xpress Frame Rack

Lift, Inspect, and Pull

Specifications:
  • Length of bed top: 9 ft. 8 in.
  • Width of bed: 35 in.
  • Highest bed height: 62 in.
  • Lowest bed height: 4.25 in.
  • Hydraulics: 5 ton
  • Lifting capacity: 5600 lbs
  • Pulling radius: 360 degrees
  • Air required: 100 psi
  • Power required: 110v, 16 amp


American Freedom Frame Rack

The American Freedom Frame Rack machine is available in two lengths to meet you needs, a 20 foot model or the longer 22 foot model

Specifications:
  • Length of bed top: 20 ft.
  • Length w/towers extended:  24 ft. 11 in.
  • Width of bed: 88 in.
  • Width w/towers extended: 11 ft. 4 in.
  • Width of treadway: 26.5 in.
  • Width between treadways: 32 in.
  • Overall height: 9 ft. 11 in.
  • Working height: 12 in. up to 42 in.
  • Hydraulics: 10 ton, all electric over hyd. or all air over hyd.
  • Power required: 120v, 20 amp, dedicated service
  • Optional tower configurations: 2, 3, or 4 towers
  • Tie downs: 222


American Freedom GT Frame Rack

Features of the American Freedom GT frame rack machine include; a 92 inch wide platform, working heights as low as 12 inches and as high as 42 inches in addition to a 12,000 pound lift capacity.

Allowing auto body shops to increase their productivity, by accepting heavier and wider vehicles, is the number one benefit of this new machine.

Specifications:
  • Length of bed top: 22 ft.
  • Length w/towers extended: 26 ft. 11 in.
  • Width of bed: 92 in.
  • Width w/towers extended: Pivot end 12 ft. 6 in.
  • Width of treadway: 28.5 in.
  • Width between treadways: 35.5 in.
  • Overall height: 9 ft. 11 in.
  • Loading height: 12 in.
  • Working height: 12 in. up to 42 in.
  • Hydraulics: 10 ton, electirc over Hydraulic or air over Hydraulic
  • Power required: 120v, 20 amp, dedicated service
  • Optional tower confirgurations: 2, 3, or 4 towers
  • Tie downs: 222
  • Lift capacity: 12,000 lbs.


  www.straight-square.com
  Proudly based in Minnesota
  © Straight and Square Dist. LLC


Straight and Square Distributing LLC is a full line supplier to the collision repair industry serving Minnesota (MN) , North Dakota (ND), and Northwestern Wisconsin (WI).